noburnp

Issuance of New Evaluation Report

IAPMO UES UER 0305 No-Burn®, Inc. announces the issuance of their new evaluation report.  The evaluation report is a product of a partnership between IAPMO Uniform Evaluation Services (UES) and No-Burn®, Inc.  No-Burn®, Inc. as a premier manufacturer of intumescent and fire retardant coatings, is widely respected and relied upon for coatings solutions and technical feasibility.  For …

Issuance of New Evaluation Report Read More »

No-Burn® Intumescent Coating Plus XD Passes at Lowest Wet Film Thickness over ENERTITE® NM Open-Cell Spray Polyurethane…

No-Burn® Plus XD is now approved over  BASF’s ENERTITE® NM, ESR-3102, at the lowest tested wet mil thickness, surpassing previous results.  The test was performed in accordance with AC377 Appendix X.  Plus XD, used in lieu of a prescribed ignition barrier for the ENERTITE® NM and Plus XD assembly, applied at a thickness of 6 mils wet (4 …

No-Burn® Intumescent Coating Plus XD Passes at Lowest Wet Film Thickness over ENERTITE® NM Open-Cell Spray Polyurethane… Read More »

Partner Advantage for Contractors: No-Burn®, Inc. and Huber Engineered Woods

We’re proud to announce that No-Burn®, Inc. (NBI) continues to partner with Huber Engineered Woods (HEW) showcasing domestically manufactured products for the building community.  Tested to comply with HEW’s R-Sheathing panels where foam plastics are exposed in attics, No-Burn® Plus XD may be applied as an ignition barrier alternate to meet code (IBC® and IRC®).        Technical info: …

Partner Advantage for Contractors: No-Burn®, Inc. and Huber Engineered Woods Read More »

No-Burn® Plus XD & Bayer’s Bayseal OC

No-Burn®’s Plus XD has successfully tested with Bayer’s Bayseal OC to meet the IRC® and IBC® requirements where spray polyurethane foam insulation is exposed in attics and crawlspaces.  Where entry is limited, the use of a non-prescriptive, alternate ignition barrier or intumescent coating is permissible and preferred.  Certified installers, nationwide, may take advantage of this system to …

No-Burn® Plus XD & Bayer’s Bayseal OC Read More »

Celebrating 15 Years in Business!

For Immediate Release                                                                           24 April 2013                                                                    www.noburn.com           Celebrating 15 years in business, No-Burn®, Inc. (NBI) commemorated by releasing a new website, an App to enhance reporting ease and welcomed aboard new affiliates and staff.  Over the past 15 years, NBI’s continued commitment to quality has positively impacted educational and business development efforts, furthering certified applicator credibility, the …

Celebrating 15 Years in Business! Read More »

No-Burn® Intumescent and Fire Retardant Coatings Meet Low VOC Content and Emission Standards

For Immediate Release 23 May 2012 www.noburn.com Contact: Lindsay Lenze No-Burn® Intumescent and Fire Retardant Coatings Meet Low VOC Content and Emission Standards Intumescent and fire retardant coatings are held to the same VOC content and emission standards as interior, flat latex coatings and paints.  Intumescents and fire retardants differ drastically, from a performance standpoint, when compared …

No-Burn® Intumescent and Fire Retardant Coatings Meet Low VOC Content and Emission Standards Read More »

No-Burn® Plus XD Approved at Lowest Wet Mil Thickness Over Sealection® 500

For Immediate Release 28 November 2011www.noburn.comContact: Lindsay Lenze No-Burn® Plus XD Approved at Lowest Wet Mil Thickness Over Sealection® 500    Plus XD Coating over Foam Plastic Insulation System MeetsAC377 Appendix X Requirements at Lowest Wet Mil Thickness No-Burn® Plus XD is now approved over Demilec’s Sealection® 500 at the lowest tested wet mil thickness, surpassing previous results.  The test was …

No-Burn® Plus XD Approved at Lowest Wet Mil Thickness Over Sealection® 500 Read More »

No-Burn®, Inc. and Quadrant Urethane Technologies Announce Partnership and Approval of No-Burn® Plus XD at Minimal Thickness…

For Immediate Release Revised 28 December 2011 www.noburn.com Contact: Lindsay Lenze No-Burn®, Inc. and Quadrant Urethane Technologies Announce Partnership and Approval of No-Burn® Plus XD at Minimal Thickness over QuadFoam® 500  No-Burn®, Inc. and Quadrant Urethane Technologies have partnered to bring Certified Applicators and Dealers best in class ignition barrier protection.  Recent tests in accordance with International …

No-Burn®, Inc. and Quadrant Urethane Technologies Announce Partnership and Approval of No-Burn® Plus XD at Minimal Thickness… Read More »

No-Burn® Plus XD Approved as an Ignition Barrier at FURTHER Reduced Thickness over ICYNENE LD-C-50®

For Immediate Release 14 October 2011www.noburn.comContact: Lindsay Lenze No-Burn® Plus XD Approved as an Ignition Barrier atFURTHER Reduced Thickness over ICYNENE LD-C-50® No-Burn® Plus XD is approved as an ignition barrier coatingover ICYNENE LD-C-50® at 6 wet and/or 4 dry mils.  No-Burn®, Inc. and Icynene Inc. continue to expand upon their suite of industry-leading product solutions.  Working towards the …

No-Burn® Plus XD Approved as an Ignition Barrier at FURTHER Reduced Thickness over ICYNENE LD-C-50® Read More »

No-Burn® and PorterSIPs Develop Alternative to Gypsum Wallboard to Meet Thermal Barrier Requirements over Structural Insulated…

For Immediate Release 16 September 2010 www.noburn.com Contact: Lindsay Lenze No-Burn® and PorterSIPs Develop Alternative to Gypsum Wallboard to Meet Thermal Barrier Requirements over Structural Insulated Panel (SIP) Assemblies No-Burn®, Incorporated and PorterSIPs announce the first success of a collaboration created to utilize specialty coating technology and innovative structural insulated panel (SIP) design to enhance the …

No-Burn® and PorterSIPs Develop Alternative to Gypsum Wallboard to Meet Thermal Barrier Requirements over Structural Insulated… Read More »